It enables the drawing in any drawing window to be saved to memory or archive in order to place it on the layout. After the layout block is created, the block is placed on the layout where the block will be placed with the Add Insert Layout Block command. The layout block is created with five different commands.
| Table of Contents |
|---|
New Layout Block-All Drawings
It blocks all the drawings in the drawing window with a single click and saves them to memory or archive.
Click Drawings / Layout Design / Create New Layout / New Layout Block-All Drawings icon in the ribbon menu .
Click any point in the drawing area. The point you clicked will be the insertion point of the block.
The Layout Block Settings dialog will open. In this dialog, give a block name and set the scale.
If you leave the Save to archive line checked, the block will be saved in the archive.
Click the OK button.
New Sheet Block-Quadrilateral
In the working drawing window, it cuts the objects inside a drawn rectangular frame and saves them to memory or archive.
Click Drawings / Layout Design / Create New Sheet / New Layout Block-Rectangle icon in the ribbon menu .
Rectangle the area you want to block in the drawing area.
Click any point in the drawing area. The point you clicked will be the insertion point of the block.
The Layout Block Settings dialog will open. In this dialog, give a block name and set the scale.
If you want to indicate the perimeter of the block with a line, check the Draw contour line.
If you leave the Save to archive line checked, the block will be saved in the archive.
Click the OK button.
New Sheet Block-Polygon
In the working drawing window, it cuts the objects within a drawn polygon (the area determined by more than 4 corners) and saves them to memory or archive.
Click Drawings / Layout Design / Create New Layout / New Layout Block-Polygon icon in the ribbon menu .
Move the mouse by clicking one of the corner of the area you want to block in the drawing area. Click the other points respectively. When you click the first point, the polygon will be complete.
Click any point in the drawing area. The point you clicked will be the insertion point of the block.
The Layout Block Settings dialog will open. In this dialog, give a block name and set the scale.
If you want to indicate the perimeter of the block with a line, check the Draw contour line.
If you leave the Save to archive line checked, the block will be saved in the archive.
Click the OK button.
New Sheet Block-Polygon Path
In the working drawing window, the objects within a drawn polygon path (the area determined by more than 4 corners) are cut and saved to memory or archive.
Click on Drawings / Layout Design / Create New Sheet / New Layout Block-Polygon Path icon in the ribbon menu .
Move the mouse by clicking one of the corner of the area you want to block in the drawing area. Click the other points respectively. When you click the first point, the polygon will be complete.
Click any point in the drawing area. The point you clicked will be the insertion point of the block.
The Layout Block Settings dialog will open. In this dialog, give a block name and set the scale.
If you want to indicate the perimeter of the block with a line, check the Draw contour line.
If you leave the Save to archive line checked, the block will be saved in the archive.
Click the OK button.
New Sheet Block-Circle
In the working drawing window, it cuts the objects that are inside a drawn circle and saves them to memory or archive.
...
Click Drawings / Layout Design / Create New Sheet / New Layout Block-Circle icon in the ribbon menu .
...
Click in the drawing area. The point you click is the center of the circle.
...
Move the mouse. Determine the diameter of the circle and click again.
...
Click any point in the drawing area. The point you clicked will be the insertion point of the block.
...
The Layout Block Settings dialog will open. In this dialog, give a block name and set the scale.
...
If you want to indicate the perimeter of the block with a line, check the Draw contour line.
...
If you leave the Save to archive line checked, the block will be saved in the archive.
...
| Child pages (Children Display) |
|---|
...
Next Topic