In The hall steel brace settings are changed by clicking the Steel Brace button from the hall settings dialog Settings tab you can adjust the steel cross settings. Cross adjustments can be settings tab. Brace settings are made separately for the right, left and upper parts of the hall in the Settings tab.
...
Location of Steel
...
Brace Settings
Select the hall where you want to change the steel cross brace settings and click the right mouse button. Click the Properties line from the right click menu that opens.
...
General
...
Tab
In the General Settings tab, there are angle determination menus for cross section and cross placement.
...
1
...
Specifications |
|---|
Element ID  It is the name of the steel cross that appears in the plan, reports and drawings. |
Section  The profile used appears. One of the previously defined profiles can be selected by clicking the list, or a new profile can be selected from the dialog that opens when the Load Section button is clicked. |
Load section  By accessing the ready section library, a list of American and European finished rolling sections is reached and a selection is made from the list. |
2
Symmetrical cross section
Material  The material for the steel brace is selected. |
Mirrored section  If the section is not symmetrical like a pipe profile, if the box is |
ticked, it places its cross arms symmetrically. |
Rotate |
 Pressing |
each button 90 that is rotated |
in the direction of the section hour. |
View Tab
In the view tab, color, material and plan label adjustments of the element are made on the plan and perspective screen.
...
Type Tab
In the Type tab, there are different subtypes for central cross and eccentric cross systems.
...
Schematic drawing  The schematic drawing and dimensions of the selected section are shown. |
Appearance Tab
...
Specifications |
|---|
Color  It is the color of the brace's border lines. It scrolls on the color palette that is opened by clicking and holding down the left mouse button. The button is released when the desired color is reached. The color box turns into the selected color. |
Line type  Line type of the line forming the brace is selected in the plan. Clicking the down arrow buttons to the right of the boxes opens the list of line types. From this list, the desired line type is selected by clicking with the left mouse button. |
Material 
The material to be covered on the solid model of the brace is selected. The brace is covered with the selected material and displayed in the solid model like this. |
Texture world length  Texture length is entered. For example; If 1 meter is entered, the selected material texture is taken as 1 meter and covered on the selected object. Considering that the texture is in the form of a square, the object surfaces are covered with 1x1 textures arranged side by side. |
Text placement  The position where the brace name will be written relative to the brace is determined according to the figure in the dialog. The program will place the name of the element according to the position selected when the column was created. |
X/Y Displacement  X and Y coordinates are entered according to the upper right corner of the brace name. If the dimension X value is positive, the dimension text shifts to the left, if it is negative, it shifts to the right. If the dimension Y value is positive, the dimension text will scroll up, and if it is negative, it will scroll down. |
Name text  The height of the brace name text is entered. The color box is slid over the color palette that is opened by clicking and holding down the button with the left mouse button. The button is released when the desired color is reached. The color box turns into the selected color. If clicked together with the Shift key, the pen thickness of the relevant color can be adjusted. If the button below is clicked, the Font Settings dialog opens. Beam Name Text, font type is set from this dialog. |
Type Tab
...
Specifications |
|---|
Central braced system  X, V, Inverse V etc. used to |
create a central braced system. |
Subtypes are selected. |
Eccentric brace system  The subtypes used to create an eccentric |
brace system are selected and the offset is set with the e parameter. |
Body
...
Deformation Tab
...
In the Body Properties tab, offset arrangement is made in different planes order to prevent collisions at the start and end points of the elements defined with the layout coordinate adjustment settings section.
...
Direction Selection Tab
In the Direction Selection tab, the offset to the defined elements is set.
...
1
...
, offset arrangement is made in different planes.
Body deformation according to brace types |
|---|
  |
  |
  |
  |
  |
  |
  |
  |
 |
 |
Side Selection Tab
...
Specifications |
|---|
Schematic drawing  The directions are numbered and shown on the schematic drawing. |
Back  When viewed from the |
rear view of the elements it is defined, it provides a connection to the last end region. |
Middle |
 It provides a connection from the midpoint of the elements it is defined. |
Front |
 When viewed from the front view of the elements it is defined, it provides a connection to the first end region. |
Custom |
 It provides connection of the |
custom elements from the distance entered in the box. |
...
Next Topic