Concrete calculation line is drawn on the concrete stairs with the draw new stair concrete calculation line command. Concrete calculation line should be defined for the stair calculation, concrete and drawing. The program calculates the stair reinforcement based on the tip calculation is made on the basis of the end force information at the position where the calculation line passes.
Stairs concrete calculation lines should be defined in continuity to cover areas that are continuous. For example, in a 3-stair flight stair, the calculation lines should be defined as the landing and the left stair flight as a single calculation line, and the landing and the other stair flight as a single calculation line within itself. With this process, you can draw reinforcements and stair sections are drawn in their own continuity. It is possible to select more than one field during calculation line definition.
...
| Info |
|---|
When an analysis is made for a stair with a concrete calculation line, the reinforcements, drawings and reports of the stair will be prepared automatically. |
Usage step |
|---|
Stair before creating calculation line  |
Choosing the first stair area  |
Choosing the second stair area  |
Determining the first point in the middle of the area  |
Scrolling the mouse in the direction parallel to the areas and determining the second point  |
Formation of calculation line  |
Stair after creating all calculation lines  |
...
Next Topic