It forms a With the Notched Seating Connection command, connection is defined with the number of stiffening plates of steel beams, one of at different elevations, which is one as one and the other as two pieces of steel beams combined at different elevations, as the number given to any selected steel column or steel beam element.
...
Location of the Notched Seating Connection Command
...
Specifications |
|---|
Welds  The thickness, type and angle values of the welds to be made at the joints are given. The information on whether it will be done on the construction site or not is entered. |
Weld electrode  The strengths of the welding electrodes are defined in the design inputs. The strength of the main element in the weld joint is controlled under the condition that it has less strength than the weld strength. If necessary, click the list and define "Create New…". To create the welding electrode, give the information "Name" and "Weld metal tensile strength" in the dialog that opens after clicking "Create New". Welding geometry is determined automatically by the program. These properties can be changed to easily determine the connection properties. Geometry features are in accordance with industry standards and in the form specified in AISC. |
Schematic drawing  Connection and weld values are shown on the schematic drawing. |
Preview  There is a preview of the connection. The selection made and the entered values can be followed simultaneously in the preview. |
...
Next Topic