You can examine the Architectural load model that is compatible with the architecture and automatically defined by opening the "Examine the Load Model.ide10" file with the analysis model checked. |
|
Click the Structural Inspection tab in the ribbon menu.
From the Loadsheading, click the Wall command.
...
In the Visualization Window, open the Right-Click Menu.
Click the Solid with Edges line.
Walls and concrete elements will be visible.
Coating and live loads of the BASE STORY and STORY 1 slabs should be arranged.
From the plan view, select slabs S01, S02, S03, S04, S05, S06 and S07all slabs.
Right Double click on any selected slab and open the right-click menu.
...
Click the Properties line.
The Slab Settingsdialog will open.
Open the Coating list in the Generaltab, Loads section.
Select the Tile Cladding.
...
Click the OK button to close the dialog.
Coating and live loads of slabs will be defined.
Open the STORTY 1 CEILING page.
From the plan view, select slabs S01, S03, S05, S06, S07all slabs.
Right click on any selected slab and open the right-click menu.Click the Properties line
Double click on any selected slab.
The Slab Settingsdialog will open.
Open the Coating list in the Generaltab, Loads section.
Select the Roof Slab.
...