This connection is a With the 4 Bolts Unstiffened End Plate Connection command, column-beam connection . After the column and beam are defined;With quick drawing mode turned on;is defined.
...
Location of the 4 Bolts Unstiffened End Plate Connection Command
You can access it under the Ribbon menu, Connection tab, Connection title.
...
Usage Steps
If Draw in Fast Mode is Active
From the Connection menu, click the 4 Bolts Unstiffened End Plate Connection icon.
In 3D perspective view, move the mouse pointer closer to the element, close to the support
After this process, the virtual image of the connection will appear.
If the connection is suitable, create the connection by clicking the left mouse button.
The connection will occur with default settings.
...
If Draw in Fast Mode is Inactive
From the Connection menu, click the 4 Bolts Unstiffened End Plate Connection icon.
Click the column then the beam before the 3D perspective view.
The 4 bolts unstiffened end plate connection settings dialog will occur with default settings.
Double-click the connection to change settings. The connection dialog will open.
...
When the connection settings are changed, the changes can be followed simultaneously in the 3D view drawn in the dialog.
...
open.
The connection will occur when the wanted settings are made and the OK button is clicked.
Location of the 4 Bolts Unstiffened End Plate Connection Settings Dialog
If the draw in fast mode is active, the connection settings will be opened automatically.
If the draw in fast mode is inactive, select the connection and click the right mouse button. Click the Properties line from the right click menu that opens.
...
4 Bolts Unstiffened End Plate Connection Settings Dialog
Type and End Plates Tab
...
Specifications |
|---|
The features of the front plate are adjusted according to the schematic information given.
...
t = Plate thickness
b and h = plate width and length
Bolts Tab
The properties of the bolts connecting the front plate and the column body are set in this tab.
...
Determine the distances between bolts according to the schematic representation given.
Bolt properties: Bolt grade, bolt size and hole properties are set in bolt properties.
...
End plate  The end plate is determined by entering the values. The values to be entered are shown in the schematic drawing. |
Schematic drawing  Connectio and plate values are shown on the schematic drawing. |
Preview  There is a preview of the connection. The selection made and the entered values can be followed simultaneously in the preview. |
Bolts Tab
...
Specifications |
|---|
Horizontal arrangement  The horizontal arrangement distance value of bolts is entered. The values to be entered are shown in the schematic drawing. |
Group 1  The distance value of the bolts to the beam is entered. The values to be entered are shown in the schematic drawing. |
Group 2  The distance value of the bolts to the beam is entered. The values to be entered are shown in the schematic drawing. |
Group 3  The distance value of the bolts to the beam is entered. The values to be entered are shown in the schematic drawing. |
Bolt properties  The Hole and Bolt Parameters dialog is opened by clicking on the bolt properties button. The bolt properties are set in this dialog. |
Schematic drawing  Connection and bolt placement values are shown on the schematic drawing. |
Preview There is a preview of the connection. The selection made and the entered values can be followed simultaneously in the preview. |
Stiffeners Tab
...
Specifications |
|---|
Continuity plate  The purpose of the continuity plates is to support the column heads in the column-beam |
...
joints and to ensure the continuity of the beam head. Continuity plates are used for reinforcement in order to bend the column head and prevent column stem flow / wrinkle. If a continuity plate will be made, the option is marked. |
...
Continuity plate is determined by entering values. The values to be entered are shown in the schematic drawing. |
Schematic drawing  Connection and plate values are shown on the schematic drawing. |
Preview There is a preview of the connection. The selection made and the entered values can be followed simultaneously in the preview. |
Extra Plates Tab
...
...
Specifications |
|---|
Web doubler plate  If the column body thickness is insufficient, |
...
web doubler plates are used to meet the shear effect of the panel area. If the |
...
web doubler plate will be made, the option is marked. |
...
Web doubler plate is determined by entering values. The values to be entered are shown in the schematic drawing. |
Schematic drawing  Connection and plate values are shown on the schematic drawing. |
Preview  There is a preview of the connection. The selection made and the entered values can be followed simultaneously in the preview. |
Chamfers Tab
...
Specifications |
|---|
Chamfers  For easy assembly of the plates in the field, the use of slope, slope type and geometric properties are determined |
...
Select the level type from the list box and set the bevel length.
Welds Tab
The weld properties of the connections given in the schematic representation are set in the Welds tab. Give the size, type, angle values and mark the option whether to weld under construction site conditions.
...
by entering the value. |
Schematic drawing  Connection, notching and cutting values are shown on the schematic drawing. |
Preview There is a preview of the connection. The selection made and the entered values can be followed simultaneously in the preview. |
Welds Tab
...
Specifications |
|---|
Welds  The thickness, type and angle values of the welds to be made at the connections are given. The information on whether it will be done on the construction site or not is entered. |
Weld electrode  The strengths of the welding electrodes are defined in the design inputs. The strength of the main element in the weld joint is controlled under the condition that it has less strength than the weld strength. If necessary, click the list and define "Create New…". To create the welding electrode, give the information "Name" and "Weld metal tensile strength" in the dialog that opens after clicking "Create New". Welding geometry is determined automatically by the program. These properties can be changed to easily determine the |
...
joint properties. Geometry features are in accordance with industry standards and in the form specified in AISC. |
...
Schematic drawing  Connection and weld values are shown on the schematic drawing. |
Preview There is a preview of the connection. The selection made and the entered values can be followed simultaneously in the preview. |
Design Data Tab
...
In the design data, the plate connection elements material is defined. The condition that the main element in the weld joint has less strength than the weld strength is controlled.
...
If necessary, click the list and define "Create New…". To create the welding electrodeconnection elements material, give the information "Name" and "Strength" material definitions and values in the dialog that opens after clicking "Create New".
...