With the Trapezoid Type 1 command, you can quickly draw the trapezoid truss type , which is one of the prepared truss types, and adjust your truss heights from its is drawn quickly. Truss heights are adjusted from the truss settings.
Trapezoid Type 1 Truss Schematic Drawing:
...
Usage step |
---|
Entering 80 cm for h1 and h2 and 120 cm for h4 in the height tab of the truss settings |
Creating the first point of the truss |
Determination of the second point of the truss and the formation of the truss |
...
Next Topic