Thanks to Building Information Modeling, common data is studied in the architectural and structural projecting process. In the system that allows architects and engineers to work together on the same structure, the project is modeled once and "Full Integration" is achieved. Architectural plan and structural plan are two separate modes of operation within the same project and exactly overlap each other.
Layer settings are automatically arranged for both architectural and structural works in the same project file with the features of make compatible Make Compatible with architecture Architecture and make compatible Make Compatible with structuralStructural.
| Table of Contents |
|---|
Make Compatible With Architecture
Make compatible with architecture command automatically arranges the layers of a project made with ideCAD Structural program according to the ideCAD Architectural program. The program ideCAD automatically closes some open layers and automatically opens some layers.
...
The table below contains the sub layers that are closed and opened in the drawing details tab in the layer settings dialog.
Closed layers |
Column ID |
Column dimensioning |
Column support ID |
Column support size |
Beam pattern |
Beam ID |
Beam dimensioning |
Shearwall pattern |
Shearwall ID |
Shearwall size |
Coupling beam dimensioning |
Strip footing ID |
Strip footing size |
Single footing ID |
Single footing dimensioning |
Pool wall ID |
Pool cantilever slab ID |
Pool surface ID |
Drop down layers |
Column plaster |
The table below shows the initial state of a project saved in the structural programideCAD Structural, when it was opened in the architectural programideCAD Architectural, and its state after the architecture was applied.
Before make compatible with architecture |
 |
After make compatible with architecture |
 |
Make Compatible With Structural
Make compatible with structural command automatically arranges the layers of a project made with ideCAD Architectural program according to the ideCAD Structural program. The program ideCAD automatically closes some open layers and automatically opens some layers.
...
The table below contains the layers that are closed in the layer settings dialog and the sub layers that are closed and opened in the drawing details tab.
Closed layers |
Terrain |
Roof |
Roof hole |
Roof plane |
Wall |
Shearwall |
Light/Camera |
Door/Window |
Railing |
Zone |
Zone hole |
Zone edge |
Sweep |
Jamb |
3D geometric object |
Exterior veneer |
Closed sub-layers |
Column plaster |
Drop down layers |
Column ID |
Column dimensioning |
Column support ID |
Column support size |
Beam pattern |
Beam ID |
Beam dimensioning |
Shearwall hatch |
Shearwall ID |
Shearwall size |
Coupling beam dimensioning |
Strip footing ID |
Strip footing size |
Single footing ID |
Single footing dimensioning |
Pool wall ID |
Pool cantilever slab ID |
Pool surface ID |
In the following table, the initial state of a project saved in the architectural program ideCAD Architectural when it was opened in the structural program ideCAD Structural and the after the make compatible with structural was applied.
Before make compatible with structural |
 |
After make compatible with structural |
 |
...
Next Topic