Page Comparison

Pen thickness and color settings adjustments can be made at any stage of the project in the programideCAD. 120 colors on the 10x12 color palette can be used in the drawings. Each of these colors can be customized by the userare user-customizable colors. In addition, 20 different pen thicknesses that can be determined by the user can be used.

...

Location of the Pen & Color Settings Command

...

You can access it under the Element Properties title of the Ribbon ribbon menu Settings tab .

...

In the Structural Program

You can access it under the Settings title of the Ribbon ribbon menu Settings tab .

...

Pen & Color Settings

...

Specifications

Description

Pen# and Thickness Image Modified Item numbers and corresponding pen thicknesses are listed. The values ​​in the thickness column are in millimeters and can be changed.
Colors Image Modified The colors defined in the

program

ideCAD are listed. There are numbers in the form of (1-P5), (12-P12) under each color box. The number on the left (1, 12, 113 etc.) indicates the position of the relevant color on the color palette, and the number on the right (P1, P11 etc.) indicates the item number assigned to the corresponding color. The colors and pen numbers of the boxes can be changed by the user.

Load Image Modified Previously saved pen and color settings are loaded.

Save Image Modified Pen and color settings are saved for later use.

Usage Steps - Changing the Thickness Value

...

• Click the right mouse button on the color box where you want to change the pen number.

• In the opened pen number dialog, enter a new pen number and click the OK button to exit the dialog. The pen number entered in the relevant color will be assigned, and the pen number under the box will change.

Pen Number Dialog

...

Specifications

Descriptions

Pen number Image Modified The item number required for the relevant color is entered.
Pen thickness Image Modified The item thickness value corresponding to the item number entered is displayed.

The pen number to be entered in the pen thickness dialog must be a value between 1-20. If a value outside of this range is entered, it is ignored and the existing pen number is preserved.

...