After the architectural projects prepared with ideCAD Architecture are examined with ideCAD Structural, Analysis and Design is done and the analysis and design results are examined.
...
You can examine the design results of steel elements in the Review Steel Design.ide10 project, which Analysis+Design has been completed |
|
Click Structural Inspection tab in the ribbon menu.
From theOutput topicheading, open the Steel All Failureslist and click .
Click the Steel PMM Failures command.In the perspective view, the results of PMM failure with Axial force and biaxial bending control will be seen. It means that the selected deficiencies are not found
...
Steel PMM insufficiency results will appear in the visualization window .
It means that there is no insufficiency in the green colored elements, and the selected deficiencies there is an insufficiency in the red colored elements are found in that element. Since the gray .
Gray colored elements are concrete elements, this control is not applied.
...
Open the Design Output list from the visualization dialog.
...
Select the PMM ratios option from the list of design output line.
The PMM ratiovalues of the steel elements will be seen displayed in the perspective viewvisualization window. The
PMM ratio greater than 1 means that the steel element is insufficient.
Select deflection failure limit from the list of design output .
In the perspective view, the steel elements with deflection control and their
...
Open the Design Output list.
Select the Deflection failure line.
Deflection control of the steel elements and results will be seen.
...
Close the visualization dialog.
Click on the Steel tab in the ribbon menu.
Open the Steellist in the Design section heading and click the Column command.
...
The Steel DEsign window Columns dialog will open.
Steel Columns will be listed in this window and the PMM ratio and loading combination used in the design will be displayed.
Select any column from the Steel Design window and click the Details button.
Section properties, material properties, internal forces designed under the selected combination, axial force and biaxial bending control values of the opened window steel column can be examined.
In addition, the K coefficients, in which the axial compressive strength and bending strength are determined, and the lateral stiffness lengths can also be examined under the title of Design Variables .In the dialog that opens, steel column sections, PMM ratios and combinations are listed.
...
Click the Details button.
The dialog with the design details of the steel column will open.
...
Close the detail dialog.
Click the OK button to close the Steel Columns dialog.
Open the Steel list in the ribbon menu and click the Beam command.
The Steel Beams dialog opens.
The dialog lists beam sections, PMM ratios, combinations and deflection control.
...
Click the Details button.
The dialog with the design details of the steel beam will open.
Close the detail dialog.
Click the OK button to close the Steel Columns dialog.
...
Follow the steps of the video below.
| Widget Connector | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
Next Tutorial