With the planar texture mapper command, the continuity of the material assigned to the surfaces of different objects such as walls, columns, beams on the same facade can be achieved.
...
Click the Planar Texture Mapper icon.
The surfaces whose material is wanted to be edited are selected.
Click the right mouse button and click the Finish Selection line.
Determine the starting point of the texture mapper. Your material will be defined to objects based on that point.
View point is determined by clicking the left mouse button on the plan screen.
The preview of arrows showing the direction of view will occur and rotate based on mouse movement.
By clicking the left mouse button, the arrows showing the viewing direction are fixed.
The Projection Parameters dialog opens automatically.
After making the necessary settings, the texture editing process on the selected surfaces is completed by pressing the OK button.
Usage step |
|---|
Before planar texture mapper  |
Selecting the surfaces whose material is desired to be edited  |
Determining the starting point  |
Determining the viewing direction  |
Making the settings  |
After planar texture mapper  |
Projection Parameters
...
Specifications |
|---|
Projector Id  The name of the projector that will appear in the plan. |
Icon size  The size of the icon indicating the arrangement is determined. |
Fit to surface  Places the texture to cover the selected surfaces. |
Repeat count  Repeats the texture for the values entered on the selected surfaces. |
Dimensions  Texture length is determined by entering values in two directions. |
Keep aspect ratio  If checked, the texture is edited by entering a value in the U box from the number of repetitions and dimensions lines. |
Worl length  Texture length is entered. |
Angle  Texture angle is entered. |
Offset U  The motion value of the texture in the x-plane is entered. |
Offset V  The motion value in the y-plane of the texture is entered |
Zenith angle  The angle value in the z plane of the texture is entered. |
Mirror U  Symmetries the texture with respect to the y plane. |
Mirror V  Symmetries the texture with respect to the x-plane. |
Edit origin  The starting point is determined again. |
Edit selection  Add/remove selected surfaces. |
...