...
Plates Tab
...
Specifications |
|---|
End Plate   The face plate is determined by entering the value. The values to be entered are shown in the schematic drawing. |
Schematic drawing  Joint and plate values are shown on the schematic drawing. |
Preview  Includes a preview of the merge. The selection made and the entered values can be followed simultaneously in the preview. |
...
Specifications |
|---|
Horizontal Arrangement  The horizontal placement distance value of the bolts is entered. The values to be entered are shown in the schematic drawing. |
Grup Group 1  Distance values are entered for the bolts to the beam and other bolts. The values to be entered are shown in the schematic drawing. |
Bolt Properties  By clicking the Bolt Properties button, the Hole and Bolt Parameters dialog is opened. Bolt properties are set from this dialog. |
Schematic drawing  Joint and bolt placement values are shown on the schematic drawing. |
Preview Includes a preview of the merge. The selection made and the entered values can be followed simultaneously in the forecast. |
...
Specifications |
|---|
Welds  The thickness, type and angle values of the welds to be made at the joints are given. Enter the information whether it will be done at the construction site or not. |
Weld electrode  The strengths of the welding electrodes are defined in the design inputs. The condition that the main element strength in the weld joint has less strength than the weld strength is checked. To create the welding electrode, give the "Name" and "Strength" information in the dialog that opens after clicking "Create New". |
Schematic drawing 
Join and source values are shown on the schematic drawing. |
Preview Includes a preview of the merge. The selection made and the entered values can be followed simultaneously in the preview. |
Truss Bolts Tab
...
Specifications
Horizontal Arrangement
The horizontal placement distance value of the bolts is entered. The values to be entered are shown in the schematic drawing.
Grup 1
Distance values are entered for the bolts to the beam and other bolts. The values to be entered are shown in |
Bolt Properties
By clicking the Bolt Properties button, the Hole and Bolt Parameters dialog is opened. Bolt properties are set from this dialog.
Schematic drawing
Joint and bolt placement values are shown on the |
Preview
Includes a preview |
. |
Design Inputs Tab
...
In the design data, the connection elements material is defined. The condition that the main element in the weld joint has less strength than the weld strength is controlled.
...