...
Run ideCAD as static administrator. Analyze the project once. Type exportspectrum to the command line in the lower toolbar . Go to the program files - ideCAD v10 folder located in the c folder on your computer. You will see a txt file named exp_spec.txt, check out this file. ideCAD works with dot for decimals, ETABS is comma or dot whichever is set on your computer, edit the txt file accordingly. Then import the file named exp_spec while ETABS - Functions -User Defined is selected.
Yatay Deprem Etkisi Altında Azaltılmış Tasarım İvme Spektrumu Design Spectrum Reduced by Respose Modification (4.4.1)
...
4- Loading Cases
Doğrultu Birleştirmesi Uygulanmış Yatay Deprem Etkisi Load Combinations of Earthquake Effects for Perpendicular Directions (4.4.2.1)
...
2- Analysis Results
a) Structure Weight
...
Equivalent Lateral Force Method 12.8.1.1 Seismic Response Coefficient for Equivalent Lateral Force Method
...
The information used in the account in the ideCAD Static Dynamic analysis report is summarized below.
...
g) Second Order Effect Calculation
12.8.7 P-Delta Effects section contains the philosophy of the account and how it is done. This account cannot be obtained directly from ETABS. The required data is taken from ETABS and the calculation is made manually.
...
Calculation results are given in the second order effects section of the ideCAD Static Earthquake regulation report.
...