...
Specifications |
|---|
Count based  The secondary beams can be drawn by entering a number. |
Interval 1/Interval 2  It shows the distance between the secondary beams. |
Interval based  Secondary beams can be drawn by entering the distance between the secondary beams. |
Count  Shows the count of secondary beams. |
Place extra steel on exact last interval  If selected, place extra steel on exact last interval. |
Spaced first element/Spaced last element  Since the first and last purlin/secondary beam usually coincide on the element, they are options that can be used to eliminate this situation. If marked, purlins/secondary beams found at the beginning and ending are not drawn. |
Mid-oriented first element/Mid-oriented last element  When placing the first and last elements, alignment is made according to the midpoint of the element. When the Spaced first element/Spaced last element options are activated, these options become inactive. |
Offsets  The start and end distances of the secondary beams can be entered. If the options perpendicular to the first/second main part are marked, offset distances can be adjusted by keeping the perpendicularity condition constant to one of the main beams. If the free offsets option is selected, offset distances can be edited independently of the main beam parts. |
...