Versions Compared

Old Version 6

changes.mady.by.user Zeynep Aladağ

Saved on

compared with

New Version Current

changes.mady.by.user Zeynep Aladağ

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Usage step

Selecting the section from the section list

Clicking in the assignment section of the element (footer) to which the section will be assigned

Changing the direction of the section from the rotation section

Determination of the truss center of gravity

Sections Tab

...

Specifications

Sections

All sections with the project added are listed. The wanted truss section is selected from the list and assigned to the truss elements. A section not included in the list is added to the list by using the load section button.

Section settings

The truss elements of the section selected from the list from the profile section are assigned from this section. The selected section can be assigned to all truss elements by clicking the All button, and only the section can be assigned to that element by clicking one of the header, footer, vertical and diagonal buttons.
With the rotation you can change the section direction. It has 0 °, 90 °, 180 ° and 270 ° options.
In the assigned section, the relevant truss element is called the section.
The shape of the assigned section appears as a preview on the right.

Section loading

The Load Section button is used to add new sections to the sections in the section list .
With the Load Combined L Section and Load Combined C Section buttons, the wanted L and C profiles are selected and combined sections are created and added to the list.

Material

The material for the truss is selected.

In case of using non-symmetrical profiles, this option is marked if the strut at the start and end of the scissors is desired to have different directions.

...