Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Welded Flange Plate Connection Settings Dialog

Type and Plates Tab

...

Specifications

Type and geometry

Image Modified

The distance between column head and beam section is entered. The values ​​to be entered are shown in the schematic drawing.

Flange plate

Image Modified

Flange plate is determined by entering values. The values ​​to be entered are shown in the schematic drawing.

Flange shim

Image Modified

Shim is a plate placed between the elements to be connected in bolted connections. If shim is to be made, the option is selected and t2, thickness value is given.

Connection plate

Image Modified

Connection plate is determined by entering values. The values ​​to be entered are shown in the schematic drawing.

Schematic drawing

Image Modified

Connection and plate values ​​are shown on the schematic drawing.

Preview

Image Modified

There is a preview of the connection. The selection made and the entered values ​​can be followed simultaneously in the preview.

Stiffeners Tab

...

Specifications

Continuity plate

Image Modified

The purpose of the continuity plates is to support the column heads in the column-beam joints and to ensure the continuity of the beam head. Continuity plates are used for reinforcement in order to bend the column head and prevent column stem flow / wrinkle. If a continuity plate will be made, the option is marked. Continuity plate is determined by entering values. The values ​​to be entered are shown in the schematic drawing.

Web doubler plate

Image Modified

If the column body thickness is insufficient, web doubler plates are used to meet the shear effect of the panel area. If the webdoubler plate will be made, the option is marked. Web doubler plate is determined by entering values. The values ​​to be entered are shown in the schematic drawing.

Schematic drawing

Image Modified

Connection and plate values ​​are shown on the schematic drawing.

Preview

Image Modified

There is a preview of the connection. The selection made and the entered values ​​can be followed simultaneously in the preview.

Plate Bolts Tab

...

Specifications

Group 1

Image Modified

Bolt distance values ​​are entered. The values ​​to be entered are shown in the schematic drawing.

Bolt properties

Image Modified

The Hole and Bolt Parameters dialog is opened by clicking on the bolt properties button. The bolt properties are set in this dialog.

Schematic drawing

Image Modified

Connection and bolt placement values ​​are shown on the schematic drawing.

Preview

Image Modified

There is a preview of the connection. The selection made and the entered values ​​can be followed simultaneously in the preview.

Chamfers Tab

...

Specifications

...

Chamfer (c1)

...

For easy assembly of the plates in the field, the use of slope, slope type and geometric properties are determined by entering the value.

...

Schematic drawing

...

Connection, notching and cutting values ​​are shown on the schematic drawing.

...

Preview

...

There is a preview of the connection. The selection made and the entered values ​​can be followed simultaneously in the preview.

Welds Tab

...

Specifications

Welds

Image Removed
image-20240206-134732.pngImage Added

The thickness, type and angle values ​​of the welds to be made at the connections are given. The information on whether it will be done on the construction site or not is entered.

Weld electrode

Image Removed
image-20240206-134739.pngImage Added

The strengths of the welding electrodes are defined in the design inputs. The strength of the main element in the weld joint is controlled under the condition that it has less strength than the weld strength.

If necessary, click the list and define "Create New…". To create the welding electrode, give the information "Name" and "Weld metal tensile strength" in the dialog that opens after clicking "Create New".

Welding geometry is determined automatically by the program. These properties can be changed to easily determine the connection properties. Geometry features are in accordance with industry standards and in the form specified in AISC.

Image Removed
image-20240206-134747.pngImage Added

Schematic drawing

Image Removed
image-20240206-134803.pngImage Added

Connection and weld values ​​are shown on the schematic drawing.

Preview

image-20240206-134847.pngImage Added

There is a preview of the connection. The selection made and the entered values ​​can be followed simultaneously in the preview.

Chamfers Tab

...

Specifications

Chamfer (c1)

Image Added

For easy assembly of the plates in the field, the use of slope, slope type and geometric properties are determined by entering the value.

Schematic drawing

Image Added

Connection, notching and cutting values ​​are shown on the schematic drawing.

Preview

Image Removed
Image Added

There is a preview of the connection. The selection made and the entered values ​​can be followed simultaneously in the preview.

Design Data Tab

...

In the design data, the plate connection elements material is defined. The condition that the main element in the weld joint has less strength than the weld strength is controlled.

...

If necessary, click the list and define "Create New…". To create the plate connection elements material, give the information material definitions and values in the dialog that opens after clicking "Create New".

...