You can create the The door in the image below is created by following the steps. In this sectiontitle, the construction of the door shown seen below will be explained step by step.
...
...
Planning on Paper
Before making a window or door, it would be helpful to plan it on paper. In this way, while the sizing process becomes easier, the possibility of making mistakes will be reduced.
...
Dio Design Settings
In this step, we will determine our working area before starting the design. This process will allow us to check the size of your window or door during design.
...
Click the Line Drawing / Polygon .
Begin the polygon by clicking your first point at X = 0, Y = 0. Click the first outer right jump point of the circle vault as the second point and move around the circle by clicking the outer jump points. Finally, click on the lower left corner node at the point X = 0, Y = 0. Click the Finish button to end the polygon.
Click on the Support / Delete Free Jump Points row. Node points will disappear.
Click the Change / Transform / Polygon-> Body / Wing Transform line.
Click on the polygon. Your safe will be formed on the outside line you have defined.
...
Setting the Profile
For the door to be created, record widths are designed as 5 cm and thicknesses as 6 cm. Profile dimensions to be selected will be 5/6 cm. Therefore, let's first define a profile with a width of 5 cm and a thickness of 6 cm.
...
Click the Line Drawing / Opening Spring .
Come to the plan window. In order to catch the starting and ending points of the opening arc, mark the lines associated with the jump to object points command. The start and end points of the lines will be marked and the cursor will catch these points.
Drag the cursor to the point where the opening arc will begin. Click when the cursor turns to OK. Get to the end point of the opening arc. Click when the cursor turns to OK. The opening arc will be drawn.
...
Next Topic