Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

After clicking theceiling cornice icon from the sweep toolbar, you can access theceiling cornice settings by clicking the settings icon.

...

General Tab

...

Specifications

Alignment

The position of theceiling cornice in the story is adjusted. If "story top" is marked, the ceiling of the story is marked "User defined", and if the level is given, the ceiling cornice is drawn at the height of the level entered according to the story floor.

Place sweep

With inner and outer options, the position of the ceiling cornice according to the section is adjusted. If the outer is marked, the ceiling cornice is drawn based on the outer edge of the section, and if the inner is marked, the inner edge is taken as basis.

Color

Choose the color of the ceiling cornice from the dialog that opens when clicked.

Material

For the solid model, select the material (texture) of the surfaces of the ceiling cornice from the drop-down list.

Texture length of the material used is entered into the texture world length. For example; If 1 is entered, the selected material texture width is taken as 1 unit and covered on the relevant walls. Considering that the texture is in the form of a square, the object surfaces are covered with 1x1 textures arranged side by side. It can be determined separately for each surface.

Invisible edge line type

Select the linetype of the background lines from the list. You can cover (make invisible) any edge of the ceiling cornice. You may want to make the line types of the edges that you make invisible, different from other edges.

Project shapes

image-20240606-064929.png

It is a list of profiles of ceiling cornice. The selected profile will be used in the enclosure. Profile preview is drawn on the right.

Schematic section

image-20240606-065000.png

Includes the dimensioned drawing of the selected section.

3D preview

It is the 3-dimensional view of the ceiling cornice. You can rotate the image around itself by holding down the left mouse button and moving it. You can zoom in and out by holding the right mouse button and moving the mouse.

...