Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

The steel crane beam design results are shown in and the failure conditions of the crane beams are displayed in the Crane Beams dialog. In the Crane Beams dialog, the material and section properties of the crane beams, biaxial bending interaction ratio, deflection control and body crease controls are displayed.

Location of Crane Beams Dialogue

...

General Specifications of Crane Beams Dialogue

Summary Information

The summary information about the line where the cursor is located is given in the name of the dialog in Layer, pose format.

Image Removed
Image Added

For example GROUND FLOOR, CRN001

Using the Shift key

In this tab, you can select more than one row with the Shift key, enter a value by double-clicking any cell whose value is open to change, and make that value apply to all selected rows.

Using the Ctrl key

Ctrl key selects the lines in between one by one.

Previous

Image Modified

The cursor moves to the previous line.

Next

Image Modified

The cursor goes to the next line.

OK

Image Modified

It saves the changes made and closes the dialog.

Cancel

Image Modified

Closes the dialog without saving the changes made.

Crane Beams

Design Controls Tab

...

Specifications

ID

Image Modified

It is the name of the crane beam in the plan.

Section

Image Modified

It is the section used in the crane beam.

Material

Image Modified

It shows the material class of the crane beam.

Biaxial bending

Image Modified

The ratio of biaxial bending moment to capacity.

Shear

Image Modified

The ratio of the shear force acting on the crane beam to the capacity.

Web sidesway buckling

Image Modified

The ratio of maximum wheel load (including crash) to body crunch strength.

Deflection

Image Modified

The ratio of deflection made by the beam to the limit value.

Check

Image Modified

Information box whose sign changes according to the situations of exceeding or not exceeding the design limits.

Design Details Tab

...

Specifications

Design code

Image Modified

It is the regulation on the design and controls of the crane beam.

Crane beam info

Image Modified

ID: It is the name of the crane beam in the plan.
Section : It is the section used in the crane beam.
Material : Shows the material class of the crane beam.
Length : It is the length of the crane beam. Crane
Crane classification: It is the crane class of the related crane.

Biaxial bending

Image Modified

Mu3: It is the moment value acting on the element in the 3 direction.
Mc3: It is the moment capacity of the element in 3 directions.
Mu2: It is the moment value acting on the element in the 3 direction.
Mc2: It is the moment capacity of the element in 3 directions.
Interaction equation: It is the interaction equation of design.
Ratio: It is the moment-capacity ratio found by the interaction equation.

Shear

Image Modified

Vu: It is the shear force acting on the element.
Vc: It is the shear force capacity of the element.
Ratio: It is the ratio of the shear force of the element to the capacity.

Deflection

Image Modified

Max vertical deflection due to wheel loads: It is the deflection formed in the beam under the loads applied by the wheels to the beam.
Limit value: The limit deflection value of the beam according to the regulation.
Ratio: It is the ratio of deflection made by the beam to the limit value.

Web sidesway buckling

Image Modified

Max. wheel load (including impact): Max. wheel load.
Web sideways buckling strengthe: It is the body wrinkle resistance of the cross section of the crane beam.
Ratio: The ratio of the maximum wheel load (including impact) to the body crumpling strength.

...