Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

After the analysis is done, you can access the trusses for space truss dialog by clicking the Space Truss command under the Steel Design heading in the ribbon menu Analysis and Design tab .

...

Trusses

...

Specifications

ID

Image Modified

It is the name of the space truss in plan.

Section

Image Modified

It is the section used in the space truss.

Material

Image Modified

It is the material used in the space truss.

Combination

Image Modified

It is the load combination that produces the most unfavorable axial capacity ratio.

Pr

Image Modified

It is the largest axial force calculated by using load coefficients among the elements forming the space truss.

Pn/Omega

Image Modified

The most negative of the elements forming the space truss is the safe axial strength.

Ratio

Image Modified

It is the axial capacity ratio.

Check

Image Modified

It is an information box whose sign changes depending on whether or not design limits are exceeded.

Previous

Image Modified

The cursor moves to the previous line.

Next

Image Modified

The cursor goes to the next line.

OK

Image Modified

It saves the changes made and closes the dialog.

Cancel

Image Modified

Closes the dialog without saving the changes made.

Summary Information

The summary information about the line where the cursor is located is given in the name of the dialog in story, pose format.

Image Modified

For example, BASE STORY, STRS001

Using the Shift key

In this tab, you can select more than one row with the Shift key, enter a value by double-clicking any cell whose value is open to change, and make that value apply to all selected rows.

Using the Ctrl key

Ctrl key selects the lines in between one by one.

...

Related Topics