With the Trapezoid Sloping Symmetric command, you can quickly draw the trapezoid sloping symmetric truss type , which is one of the prepared truss types, and adjust your truss heights from its is drawn quickly. Truss heights are adjusted from the truss settings.
Trapezoid Sloping Symmetric Truss Schematic Drawing:
...
Usage step |
|---|
Entering 80 cm for h1, h2, h4 and 100 cm for h3 in the height tab of the truss settings  |
Creating the first point of the truss  |
Determination of the second point of the truss and the formation of the truss   |
...
Next Topic