Axle Boundary defines the distance between the contour line and the axle label. The lengths of the drawn axles are automatically adjusted by the program thanks to the Axis Limit.
Axis Limit Command Location
It is located under the Move Axis Label command list under the Modify Tab.
Process steps
You can change the axle limits at any time. For this;
Click on the axle limit icon.
The axis limits settings dialog will be displayed. Here you can see your distance between the current axis limit contour line.
When the axle limits are 0 cm, the axle limits are as follows.
Change the limit values to 50 cm by clicking the axle limits icon again.
When you click the OK button, your axle limits will change.
