This combination is a column-beam connection. After the column and beam are defined;
With quick drawing mode turned on;
From the Steel menu, click the Welded Joint row for Box / Tubular Profiles.
In 3D perspective view, move the mouse pointer closer to the element, close to the support
After this process, the virtual image of the combination will appear.
If the combination is suitable, create the combination by clicking the left mouse button.
The combination will occur with default settings.
Quick drawing mode is off;
From the Steel menu, click the Welded Joint row for Box / Tubular Profiles.
Click the column then the beam before the 3D perspective view.
The combination will occur with default settings.
Double-click the combination to change settings. The unification dialog will open.
Type Tab
Select options according to the information given in the schematic representation.
Resources Tab
The source properties of the joints given in the schematic representation are set in the Resources tab. Give the thickness, type, angle values and mark the option whether to weld under construction site conditions.
Welding geometry is determined automatically by the program. These properties can be changed to easily determine the joint properties. Geometry features are in accordance with industry standards and in the form specified in AISC.
Welding Electrode:
In this section, the strengths of the welding electrodes are defined.
