Combines two columns according to the given knitting type.
From the Steel menu, click on the Constructive Unions / Column-Column Combination (Made Column) line.
In a 3D perspective view, plug the first, then the second, of the columns to be joined.
The combination will occur with default settings.
Double-click the combination to change settings.
The unification dialog will open.
Construction Tab
The number of plates to be formed along the column height is determined by distance or number. Check the option. If you select the distance option, adjust the distance values according to the given figure. The combination of the elements with the column can be welded or bolted.
Knitting Tab
Select from the list with which weave type the column will be connected. You can also choose the alignment horizontally or vertically.
Parameters Tab
You can give the geometry of the plate to be created along the column height according to the shape shown or you can use one of the profiles in the library as a connection element with the Use Section option.
Resources Tab
The source properties of the joints given in the schematic representation are set in the Resources tab. Give the thickness, type, angle values and mark the option whether to weld under construction site conditions.
Welding geometry is determined automatically by the program. These properties can be changed to easily determine the joint properties. Geometry features are in accordance with industry standards and in the form specified in AISC.
Welding Electrode:
In this section, the strengths of the welding electrodes are defined.
