It is used to derive objects in a certain range and number.
Location of the Duplicate Object Command
Clone command can be run from the toolbar on the left side of the program.
In addition, the Drawings tab is available under the Edit heading.
Options in the Object Pattern Dialog
Options | Explained |
|---|---|
Number of objects | How many pieces will be produced from the selected object or objects are written in this box. |
X Range | The horizontal translation distance of the object or objects to be produced is entered. (Zero is entered if it is not duplicated in X direction) |
Y Range | The translation distance of the object or objects to be produced in the vertical direction is entered. (Zero is entered if it is not duplicated in Y direction |
Replication type
| If the option on the left is selected, the distance between the two objects is equal to the entered X and Y range. If the right option is selected, the X and Y ranges are divided by the number of objects. The distance between two objects is this value. In other words, the number of objects as many as the number of objects entered is fit within the entered range. |
Duplicate in active working plane | If the option is selected, if you are working on a working plane, the duplication is performed on the plane. If the option is not selected, duplicating will be performed on the floor plan plane. |
Process steps
Select the object or objects.
Click the Duplicate Object icon on the left toolbar.
Enter the data in the Object Pattern dialog.
Click the OK button.
Object selection will be duplicated.
Sample:
Process Step | the plan | In 3D appearance |
|---|---|---|
Choosing objects and giving options |
 |
 |
After duplication |
 |
 |