This connection is a column-beam connection. After the column and beam are defined;
With quick drawing mode turned on;
From the Connection menu, click the Welded Box/Tube Connection.
In 3D perspective view, move the mouse pointer closer to the element, close to the support
After this process, the virtual image of the connection will appear.
If the connection is suitable, create the connection by clicking the left mouse button.
The connection will occur with default settings.
Quick drawing mode is off;
From the Connection menu, click the Welded Box/Tube Connection.
Click the column then the beam before the 3D perspective view.
The connection will occur with default settings.
Double-click the connection to change settings. The connection dialog will open.
Type Tab
Select options according to the information given in the schematic representation.
Welds Tab
The weld properties of the connections given in the schematic representation are set in the Welds tab. Give the size, type, angle values and mark the option whether to weld under construction site conditions.
Welding geometry is determined automatically by the program. These properties can be changed to easily determine the connection properties. Geometry features are in accordance with industry standards and in the form specified in AISC.
Weld electrode:
In this section, the strengths of the welding electrodes are defined.