Using the coefficients obtained from the map, the spectrum curve given in Codes is automatically determined by the programme.
İnternational Design Codes
ASCE 7-16 : 11.4.6 Horizontal Elastic Design Spectrum
TSC 2018 : Horizontal Design Response Spectrum
SYMBOLS
Fa = Short-Period Site Coefficient
Fv = Long-Period Site Coefficient for a period of 1.0 seconds
SMS = Short-period design spectral response acceleration parameter [dimensionless]
SM1 = Design spectral response acceleration parameter for a period of 1.0 seconds [dimensionless]
SS = the mapped MCER spectral response acceleration parameter at short periods
S1 = the mapped MCER spectral response acceleration parameter at a period of 1 seconds
SD1 = Design spectral response acceleration parameter for a period of 1.0 seconds
SDS = Design earthquake spectral response acceleration parameters at short periods
T = Natural vibration period [s]
T0 =Horizontal elastic design acceleration spectrum corner period [s]
TS = Horizontal elastic design acceleration spectrum corner period [s]
TL = Transition period to constant displacement region in horizontal elastic design spectrum [s]
Sa = Horizontal elastic design spectral acceleration [ g]
Horizontal elastic design spectral accelerations Sa, The function of the Design Response Spectrum curve is specified in seismic design codes and spectral response acceleration parameters are used to create this function. In the Design Response Spectrum curve, the spectral accelerations corresponding to 1-s period and corner periods are used to determine these parameters.
