Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

It is used to clone objects in a certain range and number.


Location of the Array Command

Array command can be run from the toolbar on the left side of the program.

In addition, the Drawings tab is available under the Edit heading.

Array Dialog

Specifications

Entity count

How many pieces will be produced from the selected object or objects are written in this box.

X distance

The horizontal translation distance of the object or objects to be produced is entered. (Zero is entered if it is not duplicated in X direction)

Y distance

The translation distance of the object or objects to be produced in the vertical direction is entered. (Zero is entered if it is not duplicated in Y direction

Array type

If the option on the left is selected, the distance between the two objects is equal to the entered X and Y range.

If the right option is selected, the X and Y ranges are divided by the number of objects. The distance between two objects is this value. In other words, the number of objects as many as the number of objects entered is fit within the entered range.

Create array in active workplane

If the option is selected, if you are working on a working plane, the duplication is performed on the plane. If the option is not selected, duplicating will be performed on the floor plan plane.

Usage Steps

  • Select the object or objects.

  • Click the Array icon on the left toolbar.

  • Enter the data in the Array dialog.

  • Click the OK button.

  • Object selection will be duplicated.

Usage Steps

Choosing objects and giving options



After array


  • No labels