Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

With the Trapezoid Sloping Right command, you can quickly draw the trapezoid sloping right truss type, which is one of the prepared truss types, and adjust your truss heights from its settings.

Trapezoid Sloping Right Truss Schematic Drawing:

Location of the Trapezoid Sloping Right Command

You can access it from the ribbon menu Steel tab Macro heading.

Usage Steps

  • Click on the trapezoid sloping right command.

  • Open the Truss Settings dialog by clicking the Settings icon from the Trusses toolbar .

  • In the Heights tab , enter the heights h2 and h4 for trapezoid sloping right.

  • Click the OK button to close the dialog.

  • Move the mouse cursor over the column. When the cursor changes shape, click the left mouse button. When the cursor changes shape, click the left mouse button.

  • After you have determined the first point of the truss, put the cursor on the second column and create your second point. The program will create trusses.

You can find detailed information about the truss settings from the truss settings heading.

Usage step

Entering 80 cm for h2 and 120 cm for h4 in the height tab of the truss settings

Creating the first point of the truss

Determination of the second point of the truss and the formation of the truss


  • No labels