View Source

The connection design results are displayed in the Steel Connections dialog.

Location of the Steel Connections Dialogue

After the analysis is done, you can access it by clicking the Connection command under the Steel Design title of the ribbon menu Analysis and Design tab .

Architecture & Structural Engineering > Connection Design Results > image-20210128-133237.png

Steel Connections

Architecture & Structural Engineering > Connection Design Results > image-20210128-133321.png

Specifications

Row number

Architecture & Structural Engineering > Connection Design Results > image-20210128-133500.png

It is the sequence number of the combination.

Elements

Architecture & Structural Engineering > Connection Design Results > image-20210128-133516.png

The combinations in the project are listed with their names.

Combination type

Architecture & Structural Engineering > Connection Design Results > image-20210128-133536.png

The name of the connection type.

Geometry check

Architecture & Structural Engineering > Connection Design Results > image-20210128-133551.png

Indicates whether the geometry control provides.

Combination

Architecture & Structural Engineering > Connection Design Results > image-20210128-133606.png

It shows the most unfavorable combination of connection design.

Ratio

Architecture & Structural Engineering > Connection Design Results > image-20210128-133620.png

Capacity ratio.

Strength check

Architecture & Structural Engineering > Connection Design Results > image-20210128-133632.png

Indicates whether it provides strength check or not.