Creating a Curve Wall

With the Curve Wall command, a one-piece curved wall is created in ideCAD.

Location of Curve Wall Command

In Architectural Program

You can access it under the ribbon menu Home tab, Wall title.

Open

In Structural Program

You can reach it under the ribbon menu Concrete tab, Wall title.

Open

Usage Steps

• Click the Curve Wall icon from the ribbon menu .

• The wall toolbar will open.

• From the drawing area, move your mouse to the point where you want your wall to begin and click the left button.

• The starting point of your wall will be defined and the preview will appear on the screen. It will move on your wall with the movement of your mouse.

• By moving your mouse to one point of the drawing area, you can decide your second point.

• You can define your wall by holding different points (bottom corner, middle or top corner) by clicking the delta icon from the wall toolbar or by pressing the spacebar on the keyboard. Every time you press the spacebar, your alignment will change.

• Click on the point you have determined with the left mouse button. The ideCAD will create a preview of your next wall. The curvature of your wall will change depending on the movement of your mouse.

• Determine your third point for the curvature of your wall.

• Click on the point you have determined with the left mouse button. The ideCAD will create a preview of your next wall.

• This way you can continue to create curve walls. Click the right mouse button to complete the curve wall creation. Press esc to exit the command. Your wall will be formed.