Editing Terrain Settings

Elevation edit

The coordinates of the elevation points placed are given. If wanted, a new value can be entered in the z box.

All nodes have this fixed elevation value

The feature is activated and the value entered here is applied to all elevation points.

Terrain quality

It is the indicator that determines the detail level of the terrain. A more detailed terrain drawing is created with the pointer drawn from left to right. You can adjust the pointer to a level that will give the optimum performance according to the hardware power of your computer.

Handle terrain polygon edges as elevation lines

It linearizes the slopes of the terrain lines whose elevation is between different nodes.

Delta elevation

The elevation delta value shifts all elements of the terrain to the global coordinate base. When this value is given as zero, the joint elevations represent the height values ​​based on the global base point. When a value other than zero is entered, the elevation values ​​are shifted relative to the entered value. For example +5.00 m. At the end of the given shift value, the elevation value whose elevation is +2.00 m, +7.00; The elevation value of -1.00 is calculated as +4.00.

Line style

Line type of the terrain in the plan is selected. Clicking the down arrow buttons to the right of the boxes opens the list of line types. From this list, the wanted line type is selected by clicking with the left mouse button.

Color

It is the drawing color of the land line in the plan. When the color box is clicked, the appropriate color is selected from the window that opens.

Material

You can select the material of the land top surface from the list by clicking.

Polygon cut material

You can select the material of the cut surfaces from the list by clicking.

Soil

You can select the soil base material from the list by clicking it. The soil base gains depth as much as the value entered in the depth division.

Texture world length

Texture length is entered. For example; If 1 meter is entered, the selected material texture is taken as 1 meter and covered on the selected object. Considering that the texture is in the form of a square, the object surfaces are covered with 1x1 textures arranged side by side.

Angle

The angle of the texture is given. With the angle value, you can adjust the angle of the texture according to the direction of its plane.

Perspective Preview

The preview of the created terrain is done on the screen. The settings made in the dialog are simultaneously reflected on the preview screen. The point you are editing is marked as a red point in the preview.

Elevation edit

The coordinates of the elevation points placed are given. If wanted, a new value can be entered in the z box.

All nodes have this fixed elevation value

The feature is activated and the value entered here is applied to all elevation points.

Line type

The line type of the elevation line in the plan is selected. Clicking the down arrow buttons to the right of the boxes opens the list of line types. From this list, the desired line type is selected by clicking with the left mouse button.

Color

It is the color of the elevation line in the plan. When the color box is clicked, the appropriate color is selected from the window that opens.

Perspective Preview

The preview of the created terrain is done on the screen. The settings made in the dialog are simultaneously reflected on the preview screen. The point you are editing is marked as a red point in the preview.

Elevation edit

The coordinates of the elevation points placed are given. If desired, a new value can be entered in the z box.

Color

It is the drawing color of the line of the elevation points in the plan. When the color box is clicked, the appropriate color is selected from the window that opens.

Perspective preview

The preview of the created terrain is done on the screen. The settings made in the dialog are simultaneously reflected on the preview screen. The point you are editing is marked as a red point in the preview.

Elevation edit

The coordinates of the elevation points placed are given. If wanted, a new value can be entered in the z box.

Line style

The line type of the plateau in the plan is selected. Clicking the down arrow buttons to the right of the boxes opens the list of line types. From this list, the desired line type is selected by clicking with the left mouse button.

Color

It is the drawing color of the plateau line in the plan. When the color box is clicked, the appropriate color is selected from the window that opens.

Material

You can select the material of the plateau surface from the list by clicking.

Texture world length

Texture length is entered. For example; If 1 meter is entered, the selected material texture is taken as 1 meter and covered on the selected object. Considering that the texture is in the form of a square, the object surfaces are covered with 1x1 textures arranged side by side.

Angle

The angle of the texture is given. With the angle value, you can adjust the angle of the texture according to the direction of its plane.

Excavation step

Terrain and pieces of terraşn are given numbers for excavation calculations. The excavations of the terrain and terrain plots with the same number are calculated and shown as total value at once, and the excavation of the terrain or terrain plots that are numbered separately as a separate item.

Perspective Preview

The preview of the created terrain is done on the screen. The settings made in the dialog are simultaneously reflected on the preview screen. The point you are editing is marked as a red point in the preview.

Elevation edit

The coordinates of the elevation points placed are given. If wanted, a new value can be entered in the z box.

All nodes have this fixed elevation value

The feature is activated and the value entered here is applied to all elevation points.

Line style

The line type of the hole in the plan is selected. Clicking the down arrow buttons to the right of the boxes opens the list of line types. From this list, the desired line type is selected by clicking with the left mouse button.

Color

It is the drawing color of the terrain line in the plan. When the color box is clicked, the appropriate color is selected from the window that opens.

Material

You can select the material of the hole top surface from the list by clicking.

Side material

You can select the material of the hole side surfaces by clicking on the list.

Texture world length

Texture length is entered. For example; If 1 meter is entered, the selected material texture is taken as 1 meter and covered on the selected object. Considering that the texture is in the form of a square, the object surfaces are covered with 1x1 textures arranged side by side.

Angle

The angle of the texture is given. With the angle value, you can adjust the angle of the texture according to the direction of its plane.

Excavation step

Terrain and pieces of terraşn are given numbers for excavation calculations. The excavations of the terrain and terrain plots with the same number are calculated and shown as total value at once, and the excavation of the terrain or terrain plots that are numbered separately as a separate item.

Perspective preview

The preview of the created terrain is done on the screen. The settings made in the dialog are simultaneously reflected on the preview screen. The point you are editing is marked as a red point in the preview.

Nodes

The coordinates of the elevation points placed are given. It cannot be intervened.

Line style

The line type in the plan of the sub region is selected. Clicking the down arrow buttons to the right of the boxes opens the list of line types. From this list, the wanted line type is selected by clicking with the left mouse button.

Color

The drawing color of the sub region line in the plan. When the color box is clicked, the appropriate color is selected from the window that opens.

Material

You can select the material of the sub region from the list by clicking.

Texture world length

Texture length is entered. For example; If 1 meter is entered, the selected material texture is taken as 1 meter and covered on the selected object. Considering that the texture is in the form of a square, the object surfaces are covered with 1x1 textures arranged side by side.

Angle

The angle of the texture is given. With the angle value, you can adjust the angle of the texture according to the direction of its plane.

Elevation

Elevation is given to the lower area.

Excavation step

Terrain and pieces of terraşn are given numbers for excavation calculations. The excavations of the terrain and terrain plots with the same number are calculated and shown as total value at once, and the excavation of the terrain or terrain plots that are numbered separately as a separate item.

Perspective Preview

The preview of the created terrain is done on the screen. The settings made in the dialog are simultaneously reflected on the preview screen. The point you are editing is marked as a red point in the preview.

Excavation

There are calculations according to the numbers given to the terrain and terrain parts. The excavations of the terrain and terrain plots with the same number are calculated and shown as total value at once, and the excavation of the terrain or terrain plots that are numbered separately as a separate item.

Perspective Preview

The preview of the created terrain is done on the screen. The settings made in the dialog are simultaneously reflected on the preview screen. The point you are editing is marked as a red point in the preview.

Text dx/dy

It is the x/y coordinates that determine the location of the section elevation text on the section line.

Font height

It is the writing height of the elevation text.

Angle

It is the angle of the elevation writing.

Font

Clicking it opens the font dialog. The font of elevations text is selected in the dialog.

Display type

Select the display format of the elevation positive value.

Colors

The colors of the elevations text and line are adjusted. In addition, if the box is clicked with the Shift key, the pen thickness of the relevant color can be adjusted.

Apply to entities

Dimension settings are applied to terrain and its child entities when the button is clicked.

Basic units

One of the selections is activated by clicking the left mouse button on the job.

Meter : If checked, the unit of information text will be meters.
Centimeter : If checked, the unit of the callout will be centimeter.
Millimeter : If checked, the unit of callout will be millimeter.
Feet and fractional inches : If checked, the unit of callout is feet and fractional inches. The unit format is, for example, 15 '-10 3/4 ".
Feet and decimal-digit inches : If checked, the unit of callout is feet and decimal-digit inches. Unit format is, for example, 15' -10.7".
Decimal place fit: If checked, the unit of callout will be decimal place fit. The unit format is for example 15.89 '.
Fractional inch: If checked, callout unit will be fractional inch. The unit format is, for example, 1901/2 ".
Inch with decimal places : If checked, the unit of callout is inches with decimal places. The unit format is for example 190.7".

Digit count

It determines how many digits will be shown after the comma. The desired number is selected from the list. For example, if 2 is selected, units will be shown as two digits after the comma. If 0 is selected, units will not be shown after the comma.

Fractions

It determines the precision of the dimension to be made in fractional inch format. In the list, there are options with a sensitivity of 1/2, ¼, 1/8, 1/16, 1/32, 1/34. If "no fraction" is selected, units will appear without fractions.

Rounding interval

It determines the rounding range of the measurement to be made in meters, centimeters or millimeters. If No rounding is selected, the dimensioning is done at exact value. As the range gets larger, the dimensioning is rounded up to the selected range.

Show zero unit

If it is not checked, it does not show the zero and point on the left in dimensioning. For example, it measures 0.20 as 20. If marked, the value 0.20 is scaled as 0.20.

Show zero foot

Determines whether 0 is displayed in the 0-foot gauge (less than 1 foot gauge). For example, if it is not checked, it will show a measure of 0 '- 15 "as -15". If marked, it shows as 0'-15 ".

Show zero inch on 0-1 inch range

For example, a dimension inch with a value of 8'-0 1/6 "is in the range 0-1. If the option is not ticked, the value 8'-0 1/6" will be displayed as 8'-. In other words, inch values ​​in the 0-1 range will not be displayed.

Show absolute zero inch

Determines whether to show zero inches in the dimension value where inches is absolute zero. For example, a dimension of exactly 10 'will be displayed as 10'-0 "if this option is selected. If not checked, it will be displayed as 10" -.

Small fraction text

When fractional inch format is selected, determines the fractional part to display in upper / lower case. If it is checked, the fraction is slightly above the integer and small, if not, the fraction is shown the same size next to the integer.