You can adjust the steel column settings from the Hall settings dialog Settings tab. Separate column settings can be made for the right and left sides of the hall in the Settings tab.
Location of Steel Column Settings
Select the hall where you want to change the steel column settings and click the right mouse button. Click the Properties line from the right click menu that opens.
General Settings Tab
Section loading and element misalignment can be set in the General Settings tab.
one | Load Section | By accessing the ready section library, a list of American and European finished rolling sections is reached and a selection is made from the list. |
2nd | Layout Type | It provides adjustment of 9 different offset in its placement on the column axis. |
3 | Kot | It refers to the height of the lower end of the column to be placed from the floor floor on which it is modeled. |
4 | Height | Refers to the length of the column. |
View Tab
In the steel column settings View sub-tab, the color, material and plan label settings of the element are made on the plan and perspective screen.
Curvature Tab
To model a curved column in any axis, switch to the Curvature sub-tab. Enter the curvature value of the column in the radius of curvature section, select the horizontal or vertical states of the curvature, the direction is determined by entering the value '+' or '-'.