Copy and Paste

In the program, first Copy (CTRL + C) and then Paste (CTRL + V) commands are used to copy the desired objects on the same floor or on the drawing sheet, from one floor to another floor or from a drawing sheet to another drawing sheet .

The copy operation saves the objects to be copied.

Paste operation pastes objects in memory to the desired point.

Copy	Paste

Copy (Ctrl + C) Command Location

The copy command can be run from the toolbar on the left side of the program. In addition, when the C key is pressed while holding the Ctrl key, the command will run.

Paste (Ctrl + V) Command Location

The paste command can be run from the toolbar on the left side of the program. In addition, when the V key is pressed while holding the Ctrl key, the command will run. Paste command becomes active after copy command.

Copy Command Operation Steps

To make a copy:

• Press Ctrl + C key.

• Select the objects to be copied.

• Click the right mouse button to copy the selected objects.

• Set the reference point with the left mouse button.

• Objects will be memorized.

Paste Command Operation Steps

• Switch to the page or floor to be copied.

• Press Ctrl + V key.

• Call the objects by clicking with the left mouse button.

• Preview of the objects will appear, it will move with the movement of the mouse.

• Click the point where you want to paste the objects.

• Your object will be created.

Process step	Image in plan	3D view
Selecting objects after Ctrl + C and giving the reference point
Pasting objects at reference point after Ctrl + V The bonding process can be used on the same floor or by switching to any floor.