The beam height cannot be more than 3.5 times the beam width.

The Complete Message:

The beam height cannot be more than 3.5 times the beam width. (TBDY 2018 7.4.1.1)

TBDY 2018 7.4.1.1 ( b) the beam height will not be more than 3.5 times the beam web width . You are warned because this condition is not met.

Solution

Edit the width / height ratio of the beam with the name and floor given the condition.

Select the beam, beams
Enter the properties.
In the general settings tab, change the beam width and / or height and click the OK button.