This connection is an intersecting beam-beam connection. It can be applied to one piece main beam and two piece beam connections.
Location of the Continuous Beam Connection Command
You can access it under the Ribbon menu, Connection tab, Experimentals title.
Usage Steps
From the Steel menu click on the line Continuous Beam Combination.
Click the main beam, then the beam, in the 3D perspective view.
The combination will occur with default settings.
Location of the Continuous Beam Connection Settings Dialog
Select the connection and click the right mouse button. Click the Properties line from the right click menu that opens.
Continuous Beam Connection Settings Dialog
Flange Connection Type
Specifications |
|---|
Top flange connection type  Connection type is selected for the top header. |
Schematic drawing  Connection and placement values are shown on the schematic drawing. |
Preview  There is a preview of the connection. The selection made and the entered values can be followed simultaneously in the preview. |
Plates Tab
Specifications |
|---|
Persistence plate  Persistance plate is determined by entering the value. The values to be entered are shown in the schematic drawing. |
Schematic drawing  Connection and plate values are shown on the schematic drawing. |
Preview There is a preview of the connection. The selection made and the entered values can be followed simultaneously in the preview. |
Shear Type Tab
Specifications |
|---|
Shear connection type  The shear connection type is selected. |
Connection type  Welded or bolted connection types are selected. |
Bottom flange connection type  Connection type is selected for the bottom flange. |
Schematic drawing  Connection and plate values are shown on the schematic drawing. |
Preview There is a preview of the connection. The selection made and the entered values can be followed simultaneously in the preview. |
Shear Plate Tab
Specifications |
|---|
Pressure plate  The pressure plate is determined by entering the value. The values to be entered are shown in the schematic drawing. |
General  The value is entered to determine the location of the plate according to the beam section. The values to be entered are shown in the schematic drawing. |
End plate  The end plate is determined by entering the value. The values to be entered are shown in the schematic drawing. |
Schematic drawing  Connection and plate values are shown on the schematic drawing. |
Preview There is a preview of the connection. The selection made and the entered values can be followed simultaneously in the preview. |
Top Left/Top Right Notch Tab
Select options and enter values according to the given schematic figure.
Welds Tab
The weld properties of the connections given in the schematic representation are set in the Welds tab. Give the size, type, angle values and mark the option whether to weld under construction site conditions.
Welding geometry is determined automatically by the program. These properties can be changed to easily determine the connection properties. Geometry features are in accordance with industry standards and in the form specified in AISC.
Weld electrode
In this section, the strengths of the weld electrodes are defined.
Top Left Flange Bolts Tab
Determine the count of bolts and the distances between bolts according to the schematic representation given.
Bolt properties: Bolt grade, bolt size and hole properties are set in bolt properties.
Top Right Flange Bolts Tab
Determine the count of bolts and the distances between bolts according to the schematic representation given.
Bolt properties: Bolt grade, bolt size and hole properties are set in bolt properties.
Bottom Left Flange Bolts Tab
Determine the count of bolts and the distances between bolts according to the schematic representation given.
Bolt properties: Bolt grade, bolt size and hole properties are set in bolt properties.
Bottom Right Flange Bolts Tab
Determine the count of bolts and the distances between bolts according to the schematic representation given.
Bolt properties: Bolt grade, bolt size and hole properties are set in bolt properties.
Assembly Plate Tab
The geometry of the plate used is given or one of the L profiles in the library can be used as a connection element with the Use Section option. If you check the plate geometry option, enter the plate dimensions according to the schematic representation.
