In the hall settings dialog Settings tab you can adjust the steel cross settings. Cross adjustments can be made separately for the right, left and upper parts of the hall in the Settings tab.
Location of Steel Cross Settings
Select the hall where you want to change the steel brace settings and click the right mouse button. Click the Properties line from the right click menu that opens.
General Settings Tab
In the General Settings tab, there are angle determination menus for brace section and brace placement.
1 | Load Section | By accessing the ready section library, a list of American and European finished rolling sections is reached and a selection is made from the list. |
2 | Symmetrical cross section | If the cross section is not symmetrical like a pipe profile, if the box is checked, it places its cross arms symmetrically. |
3 | Turn | Pressing any button 90 that is rotated cross-section hour. |
Appearance Tab
In the Appearance tab, color, material and plan label adjustments of the element are made on the plan and perspective screen.
Type Tab
In the Type tab, there are different subtypes for central brace and eccentric brace systems.
1 | X, V, Inverse V etc. used to form a central braced system. subtypes are selected. |
2 | The subtypes used to create an eccentric braced system are selected and the offset is set with the e parameter. |
Body Deformation Tab
In the Body Properties tab, offset arrangement is made in different planes to prevent collisions at the start and end points of the elements defined with the layout settings section.
Side Selection Tab
In the Side Selection tab, the offset to the defined elements is set.
1 | Back | When viewed from the front view of the elements it is defined, it provides a connection to the last end region. |
2 | Middle | It provides a connection from the midpoint of the elements it is defined. |
3 | Front | When viewed from the front view of the elements it is defined, it provides a connection to the first end region. |
4 | Defined | It provides connection of the defined elements from the distance entered in the box. |