This connection is an intersecting beam-beam connection. It can be applied to one piece main beam and two piece beam connections.
From the Steel menu click on the line Continuous Beam Combination.
Click the main beam, then the beam, in the 3D perspective view.
The combination will occur with default settings.
Double-click the combination to change settings.
The unification dialog will open.
Flange Connection Type
In this tab, it is determined whether the top flange connection will be, welded or bolted. Check the relevant option.
Plates Tab
Give the plate thickness and length.
Shear Type Tab
Select options based on the schematic figure given. After the selection process, you can instantly view the changes in the 3D view.
Shear Plate Tab
Give the plate dimensions according to the given schematic figure.
Top Left/Top Right Notch Tab
Select options and enter values according to the given schematic figure.
Welds Tab
The weld properties of the connections given in the schematic representation are set in the Welds tab. Give the size, type, angle values and mark the option whether to weld under construction site conditions.
Welding geometry is determined automatically by the program. These properties can be changed to easily determine the connection properties. Geometry features are in accordance with industry standards and in the form specified in AISC.
Weld Electrode
In this section, the strengths of the weld electrodes are defined.
Top Left Flange Bolts Tab
Determine the count of bolts and the distances between bolts according to the schematic representation given.
Bolt properties: Bolt grade, bolt size and hole properties are set in bolt properties.
Top Right Flange Bolts Tab
Determine the count of bolts and the distances between bolts according to the schematic representation given.
Bolt properties: Bolt grade, bolt size and hole properties are set in bolt properties.
Bottom Left Flange Bolts Tab
Determine the count of bolts and the distances between bolts according to the schematic representation given.
Bolt properties: Bolt grade, bolt size and hole properties are set in bolt properties.
Bottom Right Flange Bolts Tab
Determine the count of bolts and the distances between bolts according to the schematic representation given.
Bolt properties: Bolt grade, bolt size and hole properties are set in bolt properties.
Assembly Plate Tab
The geometry of the plate used is given or one of the L profiles in the library can be used as a connection element with the Use Section option. If you check the plate geometry option, enter the plate dimensions according to the schematic representation.
