Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

In order to draw a post, a purlin, hip/valley rafter and rafter should be defined first. Without these elements, the post cannot be defined.


Location of the Post Command

In the Architectural Program

You can access it under the ribbon menu Home tab Roof title in the architectural program .

In Structural Program

You can access it under the ribbon menu Objects tab Roof title in the structural program .

Post Settings Dialog

Specifications

Width

The width of the post section is entered.

Height

The height of the post section is entered.

Elevation

Elevatin is used to lengthen and shorten the post here. Positive elevation shorten the post from lower end, negative value lengthens it.

Usage Steps

To draw a post:

  • Click the Post icon in the ribbon menu .

  • Click with the left mouse button on the purlin or hip/valley rafter where you want to create a post.

  • Click on the rafter or or hip/valley rafter you want to create a post with the left mouse button.

  • The post dialog will be displayed. Make the necessary settings here and press the OK button.

  • Post drawing will be completed.

  • Create other posts with the above process order.

Usage step

Selection of purlin or hip/valley rafter when in post command

Selection of rafter or hip/valley rafter to create a post

Post preview creation

Making settings in the post settings dialog - entering the post width and height 25

Preview change according to the entered value

Formation of posts

  • No labels