This combination connection is a column and beam combinationconnection. After the column and beam are defined;
With quick drawing mode turned on;
From the Steel connection menu, click the Single Angle Join lineConnection icon.
In 3D perspective view, move the mouse pointer closer to the element, close to the support
After this process, the virtual image of the combination connection will appear.
If the combination connection is suitable, create the combination connection by clicking the left mouse button.
The combination connection will occur with default settings.
Quick drawing mode is off;
From From the Steel connection menu, click the Single Angle Join lineConnection icon.
Click the column then the beam before the 3D perspective view.
The combination connection will occur with default settings.
Double-click the combination connection to change settings. The unification connection dialog will open.
| Table of Contents |
|---|
...
Type and
...
Placement Tab
Select the options given in the schematic representation according to the type of connection you want to make.
...
...
Angle Tab
The geometry of the angle used is given or one of the L profiles in the library can be used as a connection element with the Use Section option. If you check the plate geometry option, enter the plate dimensions according to the schematic representation.
...
Top
...
Notch Tab
...
The notching notch geometry of the upper part top of the beam element connected to the column is adjusted.
...
Bottom
...
Notch Tab
...
The notching notch geometry of the upper bottom part of the beam element connected to the column is adjusted.
...
Support Bolts Tab
The properties of the bolts connecting the plate to the column are adjusted. The tab can be seen when the option with bolt to the support is selected from the type and layout tab.
...
Beam Bolts Tab
The properties of the bolts connecting the plate to the column are adjusted. The tab can be seen when the option with bolt to the support is selected from the type and layout tab.
...
...
Weldings Tab
The source weld properties of the joints connections given in the schematic representation are set in the Resources Welds tab. Give the thicknesssize, type, angle values and mark the option whether to weld under construction site conditions.
...
...
Weld Electrode:
Welding geometry is determined automatically by the program. These properties can be changed to easily determine the joint connection properties. Geometry features are in accordance with industry standards and in the form specified in AISC.
...
Design
...
Data Tab
In the design inputsdata, the plate material and the strength of the welding electrodes are is defined. The condition that the main element in the weld joint has less strength than the weld strength is controlled.
...
If necessary, click the list and define "new plate materialCreate New…". To create the welding electrode, provide give the information "Name" and "Strength" in the dialog that opens after clicking "Create New".