Defining a Single Angle Connection

With the Single Angle Connection command, column-beam connection is defined.

Location of the Single Angle Connection Command

You can access it under the Ribbon menu, Connection tab, Connection title.

Usage Steps

If Draw in Fast Mode is Active

  • From the connection menu, click the Single Angle Connection icon.

  • In 3D perspective view, move the mouse pointer closer to the element, close to the support

  • After this process, the virtual image of the connection will appear.

  • If the connection is suitable, create the connection by clicking the left mouse button.

  • The connection will occur with default settings.

If Draw in Fast Mode is Inactive

  • From the connection menu, click the Single Angle Connection icon.

  • Click the column then the beam before the 3D perspective view.

  • The single angle connection settings dialog will open.

  • The connection will occur when the wanted settings are made and the OK button is clicked.

Location of the Single Angle Connection Settings Dialog

If the draw in fast mode is active, the connection settings will be opened automatically.

If the draw in fast mode is inactive, select the connection and click the right mouse button. Click the Properties line from the right click menu that opens.

Single Angle Connection Settings Dialog

Type and Placement Tab

Specifications

Specifications

Connection to support

Bolted or welded connection types are selected for the support connection.

Connection to beam

Bolted or welded connection types are selected for the beam connection.

Plates

It is chosen whether the plate will be on the left or right of the beam body.

Orientation

One of the angled or straight options is chosen for the connection orientation.

Placement

Placement values ​​are entered. The values ​​to be entered are shown in the schematic drawing.

Schematic drawing

Connection and placement values ​​are shown on the schematic drawing.

Preview

There is a preview of the connection. The selection made and the entered values ​​can be followed simultaneously in the preview.

Angle Tab

Specifications

Specifications

Define plate geometry

If the option is selected, it is determined by entering the angle values. The values ​​to be entered are shown in the schematic drawing.

Use section

By selecting the option, one of the ready-made L profiles is selected from the list as an angle bracket. By clicking on the load section button, you can reach the ready section library and reach the list of American and European finished rolling sections and select from the list.

Length

Angle length value is entered.

Schematic drawing

Connection and plate values ​​are shown on the schematic drawing.

Preview

There is a preview of the connection. The selection made and the entered values ​​can be followed simultaneously in the preview.

Top Notch Tab

Specifications

Specifications

Notch

If the option is selected, notching is done according to the entered values. The values ​​to be entered are shown in the schematic drawing.

Left flange cut

If the option is selected, left flange cutting is made according to the entered values. The values ​​to be entered are shown in the schematic drawing.

Right flange cut

If the option is selected, right flange cutting is made according to the entered values. The values ​​to be entered are shown in the schematic drawing.

Schematic drawing

Connection, notching and cutting values ​​are shown on the schematic drawing.

Preview