...
Click the Tools / Geometry Control line in the classic menu and the Tools / Tools / Geometry Control icon in the ribbon menu .
In the dialog that appears on the screen, mark the conditions to be checked for geometry, specify whether the control will be made for all floors and enter the minimum object length (Zero value means no length control).
Click the OK button. The program will report whether problem situations are found or not, and list problematic objects, if any.
...
Minimum object length: Lengths of short walls, short beams and short continuous foundations min. will be compared with the object length and objects shorter than this length will be marked.
Apply to all floors: If checked, controls will be made for all floors.
Short objects: When checked, if there are objects with smaller openings than the value entered in the Minimum Object Length line, the program lists these objects.
Overlapping objects: Lists overlapping objects.
Column / beam-curtain intersections: Listed if If there are beams, walls and columns that cross are intersecting each other and are not statically related, they are listed. This situation is caused by due to the beam or curtain not coming into contact with the column.
Vertical continuity: It checks the case of vertical elements such as columns and walls to be cut in intermediate floors and forming faulty foundations. It occurs when the elevations of columns and curtains or element misalignments are given incorrectly.
Objects with the same name: Detects objects with the same names. Check the necessity of the object with the same name.
The floors with insufficient and incorrect calculation axis: In static floors, it is reported when the calculation axis is not drawn or it is drawn in only one direction.
Floor levels: Controls the relationship between floors and beams. For example, this error is encountered if the level of a slab is given in a way that it does not connect to any beam, this error is encountered.
Unfracted beams: The beams whose two ends are unloaded are checked. The beam must be attached to another element at at least one point.
Check sloping floors: Checks whether the floors have been are entered in accordance with the rules in sloping systems such as roof tiles.
Cassette and rib flooring: It checks the presence of the caliper and the continuity within itself, which is necessary for the solution of cassette and rib flooring.
Static properties user-defined elements: List the objects whose section parameters have been modified.
Incorrect objects with static materials : Lists objects for which no static material definition has been made.
Possible objects placed at wrong angle: List minor angle entitiesobjects. Check if the angles of these objects are suitable for the project.
Faulty doors / windows: It is checked whether the doors / windows are inside the wall.
...