| Table of Contents |
|---|
...
Edge Local Offset
The Edge Local Offset command is used to create a U-shaped thread on the profile object.
Click the Profile Transactions Sweep Operations icon from the Profile Object Sweep toolbar .
Click the Edge Local Offset icon from the Profile Sweep Operations toolbar that opens .
Click the edge you want to create a tooth on the profile object you drew earlier.
Move the mouse to give the first point of the thread on the object.
Slide the mouse to give the second point of the thread on the object.
Slide the mouse to give the width of the thread on the object. At this stage, you can enter thread width in the "Application Distance" box on the profile sweep operations.
Press the left mouse button and finish the process.
Remove Edge Local Offset
...
Deletes Remove the tooth created with the Edge Local Offset command on the profile object.
Click the Profile Transactions icon from the Profile Object toolbar .
Click the Edge Local Offset Delete icon from the Profile Operations toolbar that opens .
Click the edge local offset you defined earlier on the profile object.
Edge Offset
Shifts a previously defined profile object by the specified distance.
Click the Profile Transactions Sweep Operations icon from the Profile Object Sweep toolbar .
Click the Edge Offset icon from the Profile Sweep Operations toolbar that opens .
Click the desired wanted edge on the profile object you previously drew.
At this stage, enter the delay amount in the "Application Distance" box on the profile operationsSweep Operations.
Press the left mouse button.
Remove Edge Offset
...
It cancels removes the offset operation made with the Edge Offset command on the profile objectsweep.
Click the Profile Transactions Sweep Operations icon from the Profile Object Sweep toolbar .
Click the Delete Remove Edge Offset icon from the Profile Sweep Operations toolbar that opens .
Click on the edge of the previously offset profile object.
...
Edge Inner Cut
Create a given distance on the profile objectsweep.
Click the Profile Transactions Sweep Operations icon from the Profile Object Sweep toolbar .
Click the Edge Inner Cut Out icon from the Profile Sweep Operations toolbar that opens .
Click the desired wanted edge on the profile object you previously drew.
At this stage, enter the delay amount in the "Application Distance" box on the profile sweep operations.
Move the mouse to locate the space to be opened on the edge and click with the left mouse button.
A space is created as much as the value entered in the Application Distance box.
After the gap is created, the gap distance can be changed by pressing the Esc key and moving the mouse.
Remove Edge Inner
...
Cut
Removes the space created by Edge Inner Cut Out on the profile object.
Click the Profile Transactions Sweep Operations icon from the Profile Sweep Object toolbar .
Click the Delete Remove Edge Inner Cut Out icon from the Profile Sweep Operations toolbar that opens .
Click on the edge of the profile object that was previously cut.
Edge End Cut
It opens a space at a certain distance at the beginning or end of the profile object. Shorten the object.
Click the Profile Transactions Sweep Operations icon from the Profile Object Sweep toolbar .
Click the Edge CuttingEnd Cut icon from the Profile Sweep Operations toolbar that opens .
Click the desired wanted edge on the profile object you previously drew. It will be processed at the end close to the point you clicked.
At this stage, enter the amount of space in the "Application Distance" box on the profile sweep operations.
A space is created as much as the value entered in the Application Distance box.
After the gap is created, the gap distance can be changed by pressing the Esc key and moving the mouse.
Remove Edge End Cut
...
Removes the space created by Edge End Cut.
Click the Profile Transactions Sweep Operations icon from the Profile Object Sweep toolbar .
Click the Delete Remove Edge End Cut icon from the Profile Sweep Operations toolbar that opens .
Click on the edge of the profile object that was previously cut.
Hide/Show Edge
Hides or shows an edge of the profile objectsweeps.
Click the Profile Transactions Sweep Operations icon from the Profile Object Sweep toolbar .
Click the Edge Hide/Show Edge icon from the Profile Sweep Operations toolbar that opens .
Click the edge you want to keep in the profile object sweep you previously drew.
The edge of the profile object sweep will no longer be visible.
Repeat the same process to make a hidden edge visible again.
Hide/Show Edge
...
Part
Hides or shows part of the profile object sweep edge.
Click the Profile Transactions Sweep Operations icon from the Profile Object Sweep toolbar .
From the Profile Actions Sweep Operations toolbar that opens , click the Hide/Show Edge Part icon.
Click on the edge piece you want to keep in the profile object sweep you previously drawn.
The edge part of the profile object sweep will no longer be visible.
To make a hidden edge piece visible again, repeat the same process.
Change Edge
...
Part End Angles
Arranges the end parts of the profile object according to a given angle.
Click the Profile Transactions Sweep Operations icon from the Profile Object Sweep toolbar .
Click the Change Edge Part End Angles icon from the Profile Sweep Operations toolbar that opens .
Click the desired wanted edge on the profile object you previously drew. It will be processed at the end close to the point you clicked.
The cursor at the end of the profile object will wait for you to specify the angle. At the same time give the Angle value in the coordinate box and lock the value by pressing the Enter key.
Press the left mouse button.