...
The "Mirror X" command is used to set the in-and-out opening direction of the door / window. In other words, the "Mirror X" command takes the symmetry of the door / window with respect to the wall axis. This process can be done during or after the door / window is installed.To determine the opening direction before placing the door window:
Location of Mirror X
...
Usage Steps
Click the Door-/Window icon in the ribbon menu .
At the end of the cursor, the image of the door/window will be created. Click the "Mirror X" icon from the door/window toolbar to open the door/window in or out. You can also run the "Mirror X" command by pressing the 2 key on the keyboard.
Place the mouse cursor on the wall where you want to place the door/window and click the left mouse button. Door/window drawing will be completed.
To change the opening direction of a placed door / window:
...
Usage step |
|---|
Determining the location of the door/window |
...
In the Door / Window Settings dialog that opens, switch to the Placement tab.
...
Click the box in front of the X Mirror line here by clicking the left mouse button.
...
 |
Getting mirror by clicking the Mirror X icon or pressing the 2 key  |
Mirror Y
The "Mirror Y" command is used to adjust the right / left opening direction of the door / window. In other words, the "Mirror Y" command takes the symmetry of the door / window with respect to the door / window center axis perpendicular to the wall axis. This process can be done during or after the door / window is installed.To determine the opening direction before placing the door window:
Location of Mirror Y
...
Usage Steps
Click the Door-/Window icon in the ribbon menu .
At the end of the cursor, the image of the door / window will be created. Click the "Mirror Y" icon from the door/window toolbar to open the door / window in or out. You can also run the "Mirror Y" command by pressing the 3 key on the keyboard. The opening direction of the door/window will change.
Place the mouse cursor on the wall where you want to place the door / window and click the left mouse button. Door / window drawing will be completed.
...
Usage step |
|---|
Determining the location of the door/window |
Clicking the Mirror Y icon or pressing the 3 key to get mirror  |
For the opening direction of a existing placed door/window:;
Select the door/window you want to change the opening direction by clicking with the left mouse button and click the right mouse button.
In the Door/Window Settings dialog that opens, switch to the Placement tab.
Click the box in front of the X Mirror and Y Mirror line lines here with by clicking the left mouse button.
When you exit the dialog by clicking the OK button, the X and Y opening direction of the door / window you selected will change.
...