Door/Window Mirror Processes

There are Mirror Door/Window Label, Mirror X and Mirror Y commands for door/window mirror operations . Mirror operations are used according to architectural project designs.

Mirror Door/Window Label

The direction of the door/window dimensioning label can be adjusted from the door window settings, and it is possible to change the direction of the label while placing the door/window. The dimensions are smart and when the label direction is changed, the text changes automatically according to the direction of the door/window. Label direction can be changed by clicking the "Mirror Door/Window Label" icon on the door/window toolbar.

Location of Mirror Door/Window Label Command

The Mirror Door/Window Label command that appears after the Door/Window command is run is available in the auxiliary toolbar.

Open

Usage Steps

• Click the Door/Window icon in the ribbon menu .

• At the end of the cursor, the image of the door/window will be created. If the door/window label circle is not on the side you want, click the "Mirror Door/Window Label" icon from the door/window toolbar. You can also run label mirror by pressing the 1 key on the keyboard. The direction of the label will change.

• Place the mouse cursor on the wall where you want to place the door / window and click the left mouse button. Door/window drawing will be completed.

Usage step

Usage step
Determining the location of the door / window Open
Getting symmetry by clicking the symmetry icon or pressing the 1 key

Mirror X

The "Mirror X" command is used to set the in-and-out opening direction of the door / window. In other words, the "Mirror X" command takes the symmetry of the door / window with respect to the wall axis. This process can be done during or after the door / window is installed.

Location of Mirror X

Usage Steps

• Click the Door/Window icon in the ribbon menu .

• At the end of the cursor, the image of the door/window will be created. Click the "Mirror X" icon from the door/window toolbar to open the door/window in or out. You can also run the "Mirror X" command by pressing the 2 key on the keyboard.

• Place the mouse cursor on the wall where you want to place the door/window and click the left mouse button. Door/window drawing will be completed.

Mirror Y

The "Mirror Y" command is used to adjust the right / left opening direction of the door / window. In other words, the "Mirror Y" command takes the symmetry of the door / window with respect to the door / window center axis perpendicular to the wall axis. This process can be done during or after the door / window is installed.

Location of Mirror Y

Usage Steps

• Click the Door/Window icon in the ribbon menu .

• At the end of the cursor, the image of the door / window will be created. Click the "Mirror Y" icon from the door/window toolbar to open the door / window in or out. You can also run the "Mirror Y" command by pressing the 3 key on the keyboard. The opening direction of the door/window will change.

• Place the mouse cursor on the wall where you want to place the door / window and click the left mouse button. Door / window drawing will be completed.

For the opening direction of a existing placed door/window;

• Select the door/window you want to change the opening direction by clicking with the left mouse button and click the right mouse button.

• In the Door/Window Settings dialog that opens, switch to the Placement tab.

• Click the box in front of the X Mirror and Y Mirror lines here by clicking the left mouse button.

• When you exit the dialog by clicking the OK button, the X and Y opening direction of the door / window you selected will change.