...
Single Angle Connection Settings Dialog
Type and Placement Tab
Select the options given in the schematic representation according to the type of connection you want to make.
...
Angle Tab
The geometry of the angle used is given or one of the L profiles in the library can be used as a connection element with the Use Section option. If you check the plate geometry option, enter the plate dimensions according to the schematic representation.
...
Specifications |
|---|
Connection to support  Bolted or welded connection types are selected for the support connection. |
Connection to beam  Bolted or welded connection types are selected for the beam connection. |
Plates  It is chosen whether the plate will be on the left or right of the beam body. |
Orientation  One of the angled or straight options is chosen for the connection orientation. |
Placement  Placement values are entered. The values to be entered are shown in the schematic drawing. |
Schematic drawing  Connection and placement values are shown on the schematic drawing. |
Preview  There is a preview of the connection. The selection made and the entered values can be followed simultaneously in the preview. |
Angle Tab
...
Specifications |
|---|
Define plate geometry  If the option is selected, it is determined by entering the angle values. The values to be entered are shown in the schematic drawing. |
Use section  By selecting the option, one of the ready-made L profiles is selected from the list as an angle bracket. By clicking on the load section button, you can reach the ready section library and reach the list of American and European finished rolling sections and select from the list. |
Length  Angle length value is entered. |
Schematic drawing  Connection and plate values are shown on the schematic drawing. |
Preview There is a preview of the connection. The selection made and the entered values can be followed simultaneously in the preview. |
Top Notch Tab
The notch geometry of the top of the beam element connected to the column is adjusted.
...