...
Select the PMM ratios option from the list of design output.
The PMM ratio values of the steel elements will be seen in the perspective view. The PMM ratio greater than 1 means that the steel element is insufficient.
Select deflection failure limit from the list of design output .
In the perspective view, the steel elements with deflection control and their results will be seen.
Click on the Steel tab in the ribbon menu .
Open the Steel list in the Design section and click the Column command.
...
The Steel DEsign window will open.
Steel Columns will be listed in this window and the PMM ratio and loading combination used in the design will be displayed.
Select any column from the Steel Design window and click the Details button.
Section properties, material properties, internal forces designed under the selected combination, axial force and biaxial bending control values of the opened window steel column can be examined.
In addition, the K coefficients, in which the axial compressive strength and bending strength are determined, and the lateral stiffness lengths can also be examined under the title of Design Variables .