...
As a result of the changes made in the structural system and load model, the Analysis + Design results are reviewed again.
Click Structural Inspection tab in the ribbon menu.
From theView headig, click the Analysis Model command.
In the Visualization Window, an analysis model is created with rod beam and shell finite elements.
...
From the Visualization Dialog, click the Loads tab.
Open the load type list and select Own Load.
In the Visualization Window, examine the own load distribution and values of the elements.
...
Open the load type list and select Sheeting Loads.
The sheeting loads acting on the steel purlins will be visible in the Visualization Window.
...
From the Visualization Dialog, click the Deformation tab.
Open the case/combination list and select Ey .
Earthquake deformation acting in the Y direction occurs in the Visualization Window.
...
In the dialog that opens, all element internal force diagrams that occur in the element are examined.
Click the Close button to close the dialog.
From the Visualization Dialog, click the Shell Results tab.
Select Slab Resultsand M22 from the component list .
In the Visualization Window, Shell finite element stresses occur.
...