Review Analysis Results

Review the analysis results by opening the project made Analysis+Design.

  • As a result of the changes made in the structural system and load model, the Analysis + Design results are reviewed again.

  • Click Structural Inspection tab in the ribbon menu.

  • From the View heading, click the Analysis Model command.

  • In the Visualization Window, analysis model is created with beam and shell elements.

image-20240828-064643.png
  • From the Visualization Dialog, click the Loads tab.

  • Open the load type list and select Own Load.

  • In the Visualization Window, examine the own load distribution ​​of the elements.

image-20240828-065041.png
  • Open the load type list and select Sheeting Loads.

  • The sheeting loads acting on the steel purlins will be visible.

  • From the Visualization Dialog, click the Deformation tab.

  • Open the case/combination list and select Ey .

  • Earthquake deformation acting in the Y direction occurs in the Visualization Window.

  • From the Visualization Dialog, click the Animate command.

  • An earthquake effect animation occurs in the Y direction in the Visualization Window.

  • From the Visualization Dialog , click the Stop command to stop the animation.

  • From the Visualization Dialog, click the Frame Results tab.

  • Click Moment 3-3 from the Component section.

  • Select the G'+Q'+Ex+0.3Ey+0.3Ez from the case/combination list.

  • The Moment Diagram is created in the Visualization Window .

  • Click on the column whose result you want to see in the Visualization Window .

  • The frame element results dialog will open.

  • In the dialog that opens, all element internal force diagrams are examined.

  • Click the Close button to close the dialog.

  • From the Visualization Dialog, click the Shell Results tab.

  • Select Slab Results and M22 from the component list .

  • In the Visualization Window, Shell finite element stresses occur.

  • Zoom in on a slab in the Visualization Window.

  • Hover mouse over finite elements.

  • The M22 result will appear at the mouse point.


Follow the steps of the video below.

 

Next Tutorial