...
Properties on the tab change as active or inactive according to the dimension type.
...
Specifications |
|---|
Text section |
 The font height of the dimension is entered. |
 The distance of the dimension text from the objects is entered. |
 The distance of the dimension text to the dimension line is entered. |
 The position of the dimension text relative to the dimension line is selected. |
 When the button is clicked, the "Font Settings" dialog appears. Font of information text can be set here. |
Distances section |
Line displacement  The distance from the dimension lines to each other is determined. |
 The size of the cross separators is entered in the dimension lines. |
 Upper bracket size of the dimension line is entered. |
 The bottom marker size of the dimension line is entered. |
 How long the dimension line will continue after the left and right end reference points is entered. |
 The distance of the dimension line from the curved objects taken as reference by the bottom separator is entered. |
Dimension style  Display type of dimension lines is selected. |
Colors Section |
 Sets the color of the dimension text. When the color box is clicked, the appropriate color is selected from the window that opens. |
 Sets the color of the dimension lines. When the color box is clicked, the appropriate color is selected from the window that opens. |
 Sets the color of the dimension marker. When the color box is clicked, the appropriate color is selected from the window that opens. |
Value scale  The actual length values written on the dimensioning line are multiplied with the value written here and the value found at the result of multiplication is used as the measurement value. For example, the dimension line values are 120, 200, 350. If 2 is written to the scale value, the lengths of 120, 200, 250 will be written as 240, 400, 700 in the dimensioning line. |
Offset  If the "Connected to objectt" option is selected, the dimensioning line is drawn from the selected objects as far as the entered offset distance value. If the box is not checked, dimensioning is drawn on the line determined by clicking two points with the mouse in the drawing area. |
Marker type  One of the two marker types that can be used in dimensioning is selected. |
Dimension lines section |
Total  It gives the total length of all lines. |
Axis  It gives the dimensions of the axes corresponding to the dimensioning line. |
Walls/Beams/Shearwalls  It shows the lengths of each wall/beam/shearwall part in the selected line. |
Columns  Shows the lengths of the columns selected on the outer dimensioning line |
Doors / Windows  Shows the distances between the middle points of the doors / windows placed on the walls on the selected line. |
Extended properties section |
Use columns on axis dimension  In external dimensioning, the axes are dimensioned and also the columns are dimensioned. |
Use inner intersections  In the outer dimension, the wall-wall on the wall / beam / shearwall is measured, shearwall-shearwall or shearwall-beam on the shearwall, beam-beam or shearwall-shearwall intersections on the beam. |
Write door/window height  On the dimensioning line, the door / window height value is also written on the door / window width measurement value. |
...